Universal grinder to the relative motion between the activities gear, so that the material was crushed cuisine tooth impact, friction and material impact each other and the combined effects of crushed. The machine structure is simple, sturdy, stable operation, the crushing effect, the crushed material can be directly produced by the host machine cavity stainless steel. Inside the case by the machining of a smooth surface, changing the previous machine the inner wall is rough, the phenomenon of accumulated powder, medicines, food, chemical and other production more in line with national standards. Group of the grinder grinder in addition to the tooth plate is SUS3042B remaining in contact with the material inside and outside wall material is SUS316L. Line with the GMP requirements for pharmaceutical production.
Universal grinder Installation Notes:
Under a fixed-gear Imperial, as long as Imperial to bolt to.
Fold Imperial bearings, first open a Universal grinder machine cavity, Royal to the rotating gear or rotary knife, remove the maze and center bearing cap, and then resisting go to the outer end of the pulley and bearing cap, which, respectively, the axial both ends to launch Royal went to both ends of the bearing and shaft.
3 axis cavity installation bushing hole is still to keep the alignment of oil eye.
(4) Install the universal grinder sieve, sieve ring close to the machine cavity shoulder tank, otherwise damage the sieve ring closed.
(5) create universal grinder sieve ring, screen expand the length should be noted in sieve circle shoulder size production, if the screen is damage to the manufacturer should be equipped to do.
6. Installation universal pulverizer screen: two sieve ring merged alignment mark and will mesh into the sieve ring, such as mesh too tight, can be screen inward curved into, and then pushed out can. |
Universal grinder Installation Notes